TA1 (Gr.1) Titanium Alloy
TA1（Gr.1）
Quantity:
TA1
Data grade: TR270C/TA1/Gr.1
Product origin: Kobe, Japan/ATI, USA/Taotitanium
1. Overview of TA1 (Gr.1) titanium alloy:
Titanium alloy is mainly used to make airplane engine compressor parts, followed by rockets, missiles and structural parts of high-speed aircraft.
2. Chemical composition of TA1 (Gr.1) titanium alloy: %
Data grade: TR270C/TA1/Gr.1
Product origin: Kobe, Japan/ATI, USA/Taotitanium
1. Overview of TA1 (Gr.1) titanium alloy:
Titanium alloy is mainly used to make airplane engine compressor parts, followed by rockets, missiles and structural parts of high-speed aircraft.
2. Chemical composition of TA1 (Gr.1) titanium alloy: %
| C ≤ | Si ≤ | Mn ≤ | P ≤ | S ≤ | CR ≥ | Ni≥ | Mo ≥ | CU ≤ |
| 0.08 | - | - | - | - | - | - | - | - |
| other | N≤ | Al≤ | TI ≤ | FE ≤ | CO ≤ | V ≤ | H≤ | O≤ |
| 0.03 | - | Remain | 0.20 | - | - | 0.013 | 0.15 |
3. TA1 (Gr.1) titanium alloy implementation standards:
TIS H4600, ASTI B265, GB/T 14845-93, GB/T3621-94
4. Mechanical performance of TA1 (Gr.1) titanium alloy:
1,density:ρ=4.51g/cm3;
2,Grain size:6.0-7.0.
5. Physical properties of TA1 (Gr.1) titanium alloy:
1. Tensile strength: 270Mpa≤σb≤410Mpa;
2. Yield strength: σb≥165Mpa;
3. Elongation: δ≥27%.
6. Corrosion resistance of TA1 (Gr.1) titanium alloy:
Titanium has strong corrosion resistance in more media, especially in neutral and oxidative media, and can also be used in some dilute reducing acids, such as various types of atmospheric temperatures to boiling point. concentration in nitric acid. It has good corrosion resistance to most hydrating solutions, such as saturated solutions of barium hydroxide, calcium hydroxide, and magnesium hydroxide at room temperature, but it cannot be used for boiling sodium hydroxide solutions. Titanium is completely uncorroded in seawater, and most organic acids are also very corrosion-resistant (except for formic acid and oxalic acid). It has excellent corrosion resistance in wet chlorine, chloride solutions such as chlorite and hypochlorite. Corrosion resistance in sodium chloride solution increases with the increase of the pH value of the solution.
7. Application fields of TA1 (Gr.1) titanium alloy:
Aerospace, plate heat exchanger, corrugated pipe compensator expansion joint, seawater desalination, desulfurization and denitrification, chemical equipment, etc.
8. TA1 (Gr.1) titanium alloy supporting welding material:
ERTi-1
9. Type specifications and supply status of TA1 (Gr.1) titanium alloy:
Shanghai Disheng Special Alloy can produce TA1 seamless pipe, TA1 steel plate, TA1 round steel, TA1 forgings, TA1 flanges, TA1 rings, TA1 welded pipes, TA1 steel strips, TA1 wire and supporting welding materials of various specifications. Follow the diagram to process, welcome to call for consultation.
TIS H4600, ASTI B265, GB/T 14845-93, GB/T3621-94
4. Mechanical performance of TA1 (Gr.1) titanium alloy:
1,density:ρ=4.51g/cm3;
2,Grain size:6.0-7.0.
5. Physical properties of TA1 (Gr.1) titanium alloy:
1. Tensile strength: 270Mpa≤σb≤410Mpa;
2. Yield strength: σb≥165Mpa;
3. Elongation: δ≥27%.
6. Corrosion resistance of TA1 (Gr.1) titanium alloy:
Titanium has strong corrosion resistance in more media, especially in neutral and oxidative media, and can also be used in some dilute reducing acids, such as various types of atmospheric temperatures to boiling point. concentration in nitric acid. It has good corrosion resistance to most hydrating solutions, such as saturated solutions of barium hydroxide, calcium hydroxide, and magnesium hydroxide at room temperature, but it cannot be used for boiling sodium hydroxide solutions. Titanium is completely uncorroded in seawater, and most organic acids are also very corrosion-resistant (except for formic acid and oxalic acid). It has excellent corrosion resistance in wet chlorine, chloride solutions such as chlorite and hypochlorite. Corrosion resistance in sodium chloride solution increases with the increase of the pH value of the solution.
7. Application fields of TA1 (Gr.1) titanium alloy:
Aerospace, plate heat exchanger, corrugated pipe compensator expansion joint, seawater desalination, desulfurization and denitrification, chemical equipment, etc.
8. TA1 (Gr.1) titanium alloy supporting welding material:
ERTi-1
9. Type specifications and supply status of TA1 (Gr.1) titanium alloy:
Shanghai Disheng Special Alloy can produce TA1 seamless pipe, TA1 steel plate, TA1 round steel, TA1 forgings, TA1 flanges, TA1 rings, TA1 welded pipes, TA1 steel strips, TA1 wire and supporting welding materials of various specifications. Follow the diagram to process, welcome to call for consultation.
Recommend Products
